Filter
Top Products
Operating Instructions
26
Interrupting the Wash Programme
(only in emergencies)
3
Interrupt a wash programme in progress only when it is absolutely
necessary to do so. When the appliance is closed again, the air that
has entered the appliance is heated and expands significantly. As result
water may penetrate into the base of the appliance and trigger the leak
prevention system.
1
Hot steam may escape from the appliance when opening the door.
Open the door carefully.
0 1. Open the door of the dishwasher.
2. Rectify the reason for opening the appliance.
3. Close the door. The selected programme will then continue.
Setting or Changing the Delay Start Timer
Using the delay start timer it is possible to set a wash programme to
start within the next 3, 6 or 12 hours.
0 1. Press the ON/OFF button.
2. Press the button for the desired wash programme
3. Setting the delay start:
Keep pressing the X button until the indicator next to the number of
hours of delay illuminates.
Changing the delay start:
As long as the wash programme has not started, you can still change
the delay start set by pressing the X button.
Cancelling the delay start timer:
Providing the wash programme has not started you can cancel the
delay start timer. Keep pressing the X button until none of the three
hour displays is illuminated. The selected wash programme will begin
immediately the dishwasher door is closed.
3
If a delay start is selected, the programme progress display does not
illuminate.
4. Close the door.