Filter
Top Products
818 36 55-00/3 43
What to do if ...
Before contacting your local Service Force Centre, check the following
points.
Symptom Solution
No power to the appliance.
Check there is power at the socket
Check there is not a power cut by
checking the household lights.
Check the fuse has not blown.
Appliance cools too much.
Temperature is set too cold.
Temporarily select a higher temperature
setting.
The temperature in the refrigerator/
freezer is too high.
Check the ambient temperature is within
the appliances operating limits
Check the temperature setting is correct
relative to ambient conditions.
In the display, “POWER” is displayed.
There was a power failure.
Please check whether the power plug is
plugged in or whether the fuse has been
tripped (see also section “Control and
information system”). Check the status of
the food.
Temperature display shows a square or a
letter. In the display, “SERVICE” is dis-
played.
There is a function fault.
Please contact your local Service Force
Centre. Do not open the door of the
appliance again.
Warning tone sounds, in the display
“DOOR OPEN” and a red back light are
flashing
“Open door“ warning.
Please check in "Control and Information
System" section.
Warning tone sounds, a red back light is
flashing. “TEMPERATURE” is flashing in
the display
Temperature warning for freezer section
or fridge section.
Please check in "Control and Information
System" section.
Interior illumination does not function.
Important: The interior lighting switches
off automatically after 7 minutes.
Please refer to "Replace Light Bulb "
section.