Filter
Top Products
64
Description of the Appliance
The hood is supplied as an extractor unit and can also be used with a filtering function
by fitting one charcoal filter.
You will need an original AEG charcoal filter for this function (Available from your
local AEG Service Force Centre).
Only for CHDI 8820: The cooker hood is supplied ready for use as a recirculation
hood and may be used for extraction by
removing the charcoal filter which has been fitted
inside the cooker hood.
Extraction
In this version fumes are extracted to the
outside via a hose connected to the coupling
ring A. Fig. 1.
In order to obtain the best performance the
hose should have a diameter equal to the outlet
hole.
Should there already be a pipe with a diameter
of 125mm that ducts to the outside through the
wall or roof, it is possible to use the 150/125
mm reduction flange provided. In this case the
hood will be slightly noisier.
Fig. 1
Recirculation
The air is filtered through a charcoal filter and returned to the kitchen.
You will need an original AEG charcoal filter for the filtering function. (See Special
Accessories).
Fix the deflector using 4 screws Ø 3.5x6.5 mm. Fig. 2.
F
Fig. 2
A