Filter
Top Products
28 818 19 26-00/0
Something Not Working
Before contacting your local Service Force Centre, check the following
points.
Sympton Solution
No power to the appliance.
Check there is power at the socket
Check there is not a power cut by
checking the household lights.
Check the fuse has not blown.
All the lights in the temperature display
are flashing.
There is a function error.
Inform customer service. Do not open the
door of appliance any more.
The temperature in the freezer is too high.
Check the ambient temperature is within
the appliances operating limits
Check the temperature regulator is turned
to the correct setting relative to ambient
conditions.
The compressor runs continuously
Adjust the temperature regulator to give
correct temperature control.
Check that the door is closed.
Large quantities of food have recently
been placed in the cabinet and/or door is
frequently opened.
Check that air ventilation is not
obstructed.
Excessive build up of frost.
If the door seal is not airtight (probably
after reversing the door) apply warm air
to the non sealing area using a hair dryer
set to a gentle heat. (do not use a fan
heater for this purpose). This will make
the rubber more supple and allow it to
revert to its original shape.
Noise Refer to Normal Operating Sounds
The compressor does not start immedia-
tely after changing the temperature set-
ting.
This is normal, the compressor starts after
a period of time.