Filter
Top Products
53What to do if …
What to do if …
If you are unable to remedy the problem by following the above sugges-
tions, please contact your local Service Force Centre.
1 Warning! Repairs to the appliance are only to be carried out by qualified service
engineers. Considerable danger to the user may result from improper repairs.
3 If the appliance has been operated incorrectly, the engineer's visit will be
chargeable, even during the warranty period.
3 Advice on cookers with metal fronts:
Because of the cooler surface at the front of the cooker, opening the oven
door during (or just after) baking or roasting may cause the glass to
steam up.
Problem Possible cause Remedy
The oven does not heat up The oven is not switched on Switch the oven on
The clock has not been set Set the current time on the
clock
The required settings have not
been set
Check the settings
The oven’s automatic cut-out
has been triggered.
See Automatic cut-out
The fuse in the house’s electri-
cal wiring (fuse box) has been
tripped
Check fuse. If the fuses trip re-
peatedly, please call an au-
thorised electrician
The oven lighting is not oper-
ating
The oven bulb is faulty Change the oven bulb
Pyroluxe is not working (“C1”
appears in the display)
Side rails/oven shelf runners
have not been removed
Remove side rails/oven shelf
runners
F2 appears in the clock display Door not properly closed or
door lock defective
Close door properly;
Turn the appliance off and on
again via the house fuse or the
safety switch in the fuse box;
If displayed again, please con-
tact the Customer Care De-
partment
In the clock display there ap-
pears a fault code that is not
listed above
Fault in the electronics Switch off the appliance via
the house fuse or the safety
switch in the fuse box and
switch it on again.
If displayed again, please con-
tact your local Service Force
Centre.