Filter
Top Products
7
Charcoal Filter
The charcoal filter cannot be cleaned.
The filter should be replaced at least every
three months or more frequently if the hood
is used more than three hours per day.
To Remove/Replace the Charcoal
Filter
1. Remove the metal inlet grille.
2. Carefully turn the disk (C) anti-clockwise and
remove the the charcoal filter (B) from the
motor support (A) as illustrated opposite.
3. Clean the metal inlet grille and motor support
before replacing the charcoal filter.
4. Place the new charcoal filter (B) over the motor
support (A), and while holding the filter
securely insert the disk (C) and turn clockwise.
Changing the Light Bulb
If the light bulb fails to function check that the bulb is
screwed into the holder.
If bulb failure has occurred then it should be
replaced with a 220-240V 40W clear
cylindrical shape bulb with a small E14 screw
thread.
Charcoal filters, grease filters and light
bulbs can be obtained from your local
Service Force Centre
This appliance can be a fire hazard if the
grease and charcoal filters are not replaced as
recommended.