Electrolux DI 8610 Ventilation Hood User Manual


 
57
heaters and gas fires, in the same room.
Hoods can only be used safely with appliances connected to a chimney if the room
and/or flat (air/environment combination) is ventilated from outside using a suitable
ventilation hole approximately 500-600 cm
2
large to avoid the possibility of a
depression being created during operation of the hood.
If you have any doubts, contact the relevant controlling authority or building
inspectors office.
Since the rule for rooms with fuel burning appliances is outlet hole of the same size as
the ventilation hole, a hole of 500-600 cm
2
, which is to say a larger hole, could
reduce the performance of the extractor hood.
If the hood is used in its filtering function, it will operate simply and safely in the above
conditions without the need for any of the aforementioned measures.
When the hood is used in its extractor function, the following rules must be followed to
obtain optimal operation:
short and straight outlet hose
keep bends in outlet hose to a minimum
never install the hoses with an acute angle, they must always follow a gentle curve.
keep the hose as large as possible (preferably the same diameter as the outlet
hole).
Failure to observe these basic instructions will drastically reduce the performance and
increase the noise levels of the extractor hood.