Electrolux DSIG 456 Cooktop User Manual


 
The electronic timer
Please note that this is a 24 hour clock, for example 2.00 pm is shown
as 1400.
In the following pages we
explain how to set the controls.
Read through them a few times until
you are familiar with the procedure.
If the oven is switched off on the
wall, or there is a loss of power, the
clock will stop and you will not be
able to use the ovens. When you
first switch the electricity supply on,
the timer display will flash.
To set the time of day
Turn the selector knob to 'Manual'
then turn to 'Time Setting'.
Set the correct time by turning
and holding the setting knob
clockwise. Adjust the time by turning
the setting knob in either direction.
Turn the selector knob back to 'Manual'.
To use the countdown
Turn the selector knob to
'Countdown'. Turn the setting knob
clockwise until the display shows
the time you want. The bell
symbol ( ) will be showing and
this will stay lit up during the time.
Our diagram shows the timer set to
5 minutes.
If you change your mind and want to cancel the time you have set,
simply turn the setting knob anticlockwise. Then turn the selector to
'Manual'.
D S I G 4 5 6
22
The electronic timer
Cookpot symbol
Selector Setting knob
Bell symbol