Filter
Top Products
Select and start a washing program
Select the washing programme and
delay start with the door slightly
opened. The start of the program or
the countdown of the delay start
will occur only after the closure of
the door. Until then it is possible
to modify the settings.
1. Check that the baskets have been
loaded correctly and that the spray
arms are free to rotate
2. Press the On/Off button: all the
program lights illuminate (setting
mode).
3. Press the button corresponding to
the required program (see
"Washing programmes" chart).
When a program has been
selected the corresponding light
will illuminate.
The indicator lights of the program
phases start flashing.
Close the dishwasher door, the
program starts automatically.
Setting and starting the
programwith "delay start"
1. After having selected the washing
program, press the delay start
button until the flashing number of
hours for the delay start will
appear in the digital display. The
commencement of the selected
washing program can be delayed
from 1 to 19 hours.
2. Close the dishwasher door, the
countdown starts automatically and
the number in the display stops
flashing.
3. The countdown will decrease with
steps of 1 hour.
4. The opening of the door will not
modify or interrupt the countdown.
5. Once the delay start has elapsed
the program will start automatically.
The selection of the washing program
and delay start can also occur with
the door closed. Keep in mind that in
this way, once a washing program
button is pressed you have ONLY 3
seconds in which you can choose
another program or select a delay
start, after which the selected program
will start automatically.
daily use electrolux 19
117994350.qxp 12/20/2006 5:46 PM Page 19