Filter
Top Products
11
Making the Gas/Electric Connection
REQUIREMENTS
Gas Supply Requirements
Check your local building codes for the proper method of installation. In the
absence of local codes, this appliance should be installed in accordance with the
National Fuel Gas Code ANSI Z223.1/NFPA 54. Be certain that the appliance being
installed is correct for the gas service being provided. Refer to the data plate
located on the bottom of the cooktop chassis.
WARNINGWARNING
WARNINGWARNING
WARNING
•If the gas or electric service provided does not meet the product specifications,
do not proceed with the installation. Call the selling dealer, the gas supplier, or a
licensed electrical or plumbing contractor.
•The grounding plug must not, under any circumstances, be cut or removed.
•This appliance must be installed by a licensed plumber or gas fitter when
installed within the Commonwealth of Massachusetts.