Filter
Top Products
9
Operation
HALOGEN BULBS
This range hood requires two halogen bulbs (Type MR16, 12Volt, 20 Watt Max).
1 Loosen the ring nut by turning it counterclockwise.
2 Remove the bulb by pulling downward (DO NOT ROTATE).
3 Replace with Type MR16, 12Volt, 20 Watt Max halogen bulb.
4 Reinstall the ring nut. Turn clockwise to secure.
WARNING
Always switch off the electrical supply before performing any operation on the appliance.
CAUTION
Bulb may be hot.
CAUTION
Use of bulbs greater than 20 watts will cause the fuse to open..
RING NUT
BULB
Figure 2