Filter
Top Products
CLOCK FUNCTIONS
SYM-
BOL
FUNCTION DESCRIPTION
TIME OF DAY To show the time of day. To change the time of day, re-
fer to 'Setting the time of day'.
DURATION To set how long the appliance operates.
END To set when the appliance deactivates. You can use Du-
ration and End at the same time (Time delay) if you want
the appliance to activate and deactivate automatically
later.
COUNT UP TIMER
Use the Count Up Timer to monitor how
long the appliance operates. It starts to
count when the appliance starts to heat.
Reset the Count Up Timer: Touch
and at the same time until the display
shows "00:00" and the Count Up Timer
starts to count up again.
You cannot use Count Up Timer
when Duration or End is set.
SETTING THE DURATION
1.
Activate the appliance and set a heat-
ing function and temperature.
2.
Touch again and again until the dis-
play shows
.
flashes in the display.
3.
Touch or to set the minutes for
DURATION.
4.
Touch to confirm.
5.
Touch or to set the hours for
DURATION.
If you touch while you set the
hours for DURATION, the appli-
ance goes to the END function set-
ting.
6.
When the set time ends, an acoustic
signal sounds for two minutes.
and the time setting flash in the dis-
play. The appliance deactivates.
Touch a sensor field to stop the acous-
tic signal.
7.
Deactivate the appliance.
SETTING THE END
1.
Activate the appliance and set a heat-
ing function and temperature.
2.
Touch again and again until the dis-
play shows
.
flashes in the display.
3.
Touch or to set END (first you
set the minutes and then the hours)
and
to confirm.
4.
When the set time ends, an acoustic
signal sounds for two minutes.
and the time setting flash in the dis-
play. The appliance deactivates.
5.
Touch a sensor field to stop the acous-
tic signal.
6.
Deactivate the appliance.
SETTING THE MINUTE MINDER
Use the MINUTE MINDER to set a count-
down (maximum h min). This function has
no effect on the operation of the appliance.
You can set the MINUTE MINDER at any
time and also when the appliance is off.
1.
Touch .
and "00" flash in the display.
2.
Use or to set the MINUTE
MINDER. First you set the seconds
and then minutes and hours.
3.
Touch and at the same time to
reset the set time.
4.
Touch or the MINUTE MINDER
starts automatically after five seconds.
5.
When set time ends, an acoustic signal
sounds for two minutes. "00:00" and
flash in the display.
14
www.electrolux.com