Filter
Top Products
D
E
F
Only a qualified person can con-
nect the appliance to the electricity
supply.
1.
Open the mains terminal cover (D).
2.
Put the connection cable into the sup-
plied rings (E). This is to prevent the
cable from rubbing against the drawer.
The connection cable is on the housing
side.
3.
Install the cable grip (F).
4.
Connect the terminal as in the illustra-
tion.
5.
Put the cable into the strain relief
clamp.
6.
Close the mains terminal cover.
CONNECTION DIAGRAM 400 V
L2
L3
400V
L1PE
400V 3~
L2
400V
L1PE
400V 2~
123
45
123
45
Phase definitions: L1, L2, L3 (or R, S,T)
WARNING!
If service is required always discon-
nect the appliance from the power
supply.
ELECTRICAL CONNECTION WITH THE HOB
You can connect the oven to an independ-
ent hob from the current range of Electro-
lux and AEG hobs. You can purchase the
necessary connection cable separately:
• AK - EB/GKTC (S) 1 m for ceramic hobs.
• AK - EB/GKTCi (S) 1 m for induction
hobs.
The hob connection socket is at the top of
the oven cabinet.
ENGLISH 29