Filter
Top Products
Installing the hood to the wall
Use the drill holes diagram N1, drill as
indicated, insert two hooks in the upper drill
holes (Fig. 14,R1) and two dowels in the lower
drill holes (Fig. 14,R2).
Fasten the lower bracket to the wall with two
screws (Fig. 12-14,Q).
Hang the cooker hood on the wall, regulate the
position of the cooker hood (Fig. 14 - screws
S1 for vertical regulation, screws S2 for depth
regulation)
Place connection ring and discharge pipe (or
deflector if supplied) to the cooker hood outlet
(see Use section), fasten the cooker hood to
the lower bracket (Fig. 12-14,Q) with two
screws and plastic washers (Fig. 14,T).
Access to the screws that secure the lower
bracket may be through the drill holes located
inside the cooker hood (Fig. 14,U).
N1
R1R1
R2
R2
Q
Q
S1
U
U
S2
T
T
Fig. 14