Filter
Top Products
18 electrolux
6) place the door on a stable surface (Fig.
4) protected by a soft cloth to prevent
the handle surface from being dam-
aged;
7) release the locking system to remove
the internal panes of glass (Fig. 5);
8) turn the 2 fasteners 90° and extract
them from their seats (Fig. 6);
9) gently lift and carefully take off the
uppermost pane marked by a decora-
tive frame on 4 sides (Fig. 7).
Clean the oven door with lukewarm wa-
ter and a soft cloth. Do not use products
such as scouring pads, steel wool, abra-
sive sponges or acids because they could
damage the special heat-reflecting sur-
face of the internal panes of glass.
After cleaning, reassemble the panes in
the door and then the oven door, follow-
ing the procedure described above in
reverse. Make sure you reposition the
panes correctly.
To perform this operation correctly, pro-
ceed as follows:
- the decorated internal pane with a
frame on the 4 sides must be reas-
sembled so that the screen-printing is
facing outwards. The side of the pane of
glass is correct if you do not feel any
roughness near the screen printing when
you pass your fingers over the surface.
Fig. 5
Fig. 4
90°
Fig. 6
1
2
Fig. 7