Filter
Top Products
electrolux 19
A) End of shaft with nut
B) Washer
C) Elbow
FO 0814
FO 0264
It is important to install the elbow corrIt is important to install the elbow corr
It is important to install the elbow corrIt is important to install the elbow corr
It is important to install the elbow corr
ectlyectly
ectlyectly
ectly
, with the shoulder on, with the shoulder on
, with the shoulder on, with the shoulder on
, with the shoulder on
the end of the thread, fitted to the hob connecting pipe.the end of the thread, fitted to the hob connecting pipe.
the end of the thread, fitted to the hob connecting pipe.the end of the thread, fitted to the hob connecting pipe.
the end of the thread, fitted to the hob connecting pipe.
Failure to ensure the correct assembly will cause leakage of gas.Failure to ensure the correct assembly will cause leakage of gas.
Failure to ensure the correct assembly will cause leakage of gas.Failure to ensure the correct assembly will cause leakage of gas.
Failure to ensure the correct assembly will cause leakage of gas.
Gas ConnectionGas Connection
Gas ConnectionGas Connection
Gas Connection
Connection to the gas supply should be with either rigid or semi-rigid pipe, i.e.
steel or copper.
The connection should be suitable for connecting to R 1/2 (1/2 BSP male thread).
When the final connection has been made, it is essential that a thorough leak test
is carried out on the hob and installation.
Ensure that the main connection pipe does not exert any strain on the hob.
On the end of the shaft, which includes the G 1/2" threaded elbow,
adjustment is fixed so that the washer is fitted between the components
as shown in the diagram. Screw the parts together without using excessive
force.