Filter
Top Products
4
Installation
Installing the Wine Keeper
Your Electrolux Wine Keeper has been designed for either free-standing or built-in installation. When built-in,
your wine keeper does not require additional air space for top, sides or rear. In either case, the front grille must
NOT be obstructed.
NOTE
To ease unit installation and removal, it is
recommended that the cabinet rough opening
dimensions be increased by at least ¼ inch over the
dimensions given for your unit.
Width Height Depth
23 1/2 inches 75-76 inches 24 7/8 inch
Unit Dimensions
Side
View
29.875” (75.88 cm)
27.50” (69.85 cm)
24.875” (63.18 cm)
75-76”
(191-193 cm)
Front
View
23.50” (59.69 cm)
3.25”
2.75”
Top
View
49”
(124.46 cm)
23.50” (59.69 cm)
3.00”
(7.62 cm)
(6.98 cm)
(8.25 cm)
NOTE
All units require zero clearance when installed
flush with a cabinet or wall. Electrolux stainless
steel models require a minimum 3 inch handle
clearance when installed against a wall or cabinet
that extends beyond the front edge of the unit.
Product Dimensions