Electrolux EI30WC60GS Ventilation Hood User Manual


 
2020
2020
20
Optional CharOptional Char
Optional CharOptional Char
Optional Char
coal Filterscoal Filters
coal Filterscoal Filters
coal Filters
If the model is not vented to the outside, the air will be recirculated through disposable charcoal filters that
help remove smoke and odors.
The charcoal filters cannot be cleaned.
They must be replaced.
The charcoal filters are clipped inside of each metal grease filter (mounting instructions included with charcoal
filters kit).
The charcoal filters should be replaced every 4-6 months (depending on hood usage).
NOTE: NOTE:
NOTE: NOTE:
NOTE: DO NOT rinse, or put charcoal filters in an automatic dishwasher.
NOTE: NOTE:
NOTE: NOTE:
NOTE: Charcoal filters are
not not
not not
not included with the hood.
They must be ordered from your supplier.
Order the needed kit specifying your hood model and width size.
CharChar
CharChar
Char
coal filter placement (Recircoal filter placement (Recir
coal filter placement (Recircoal filter placement (Recir
coal filter placement (Recir
culating accessories)culating accessories)
culating accessories)culating accessories)
culating accessories)
Fit the charcoal filter mattress on the upper side of each grease filter.
Use provided springs to fix it in place.
Note: Note:
Note: Note:
Note: When removing for replacing for a new one do not remove Fixing Springs, simply pull out and rotate
outwards.
Care and cleaning
remove finger prints and give added shine, use
cleaners such as Stainless Steel Magic. Do not allow
any cleaning compounds to remain in contact with
stainless steel for extended periods.
Plastic surfaces:Plastic surfaces:
Plastic surfaces:Plastic surfaces:
Plastic surfaces: Wipe with a moist soapy sponge.
Rinse and dry.
Aluminum Mesh Filters: Clean filters in the dish-
washer or by agitating in sudsy water. Ensure that
there is no soil trapped in the fine mesh. Dry the
filters before reinstalling them.
Anodized Aluminum surfaces: Anodized Aluminum surfaces:
Anodized Aluminum surfaces: Anodized Aluminum surfaces:
Anodized Aluminum surfaces: Top cap is not remov-
able. Wash top and underside with hot sudsy water.
Rinse and wipe dry or apply Fantastic® or Formula
409® first to a clean sponge or paper towel and
wipe clean. DO NOT USE powdered cleansers or
steel wool pads.
CleaningCleaning
CleaningCleaning
Cleaning
Always use the mildest cleaner that will do the
job. Use clean, soft cloths, sponges or paper
towels.
Rub stainless steel finishes in the direction of the
grain. Wipe area dry to avoid water marks.
After cleaning, place all parts in their proper
positions before using.
The cleaners recommended below indicate a type
and do not constitute an endorsement. Use all
products according to package directions.
Hood SurfaceHood Surface
Hood SurfaceHood Surface
Hood Surface
Painted Surfaces: Painted Surfaces:
Painted Surfaces: Painted Surfaces:
Painted Surfaces: For general care, wipe the outside
of the hood with sudsy water or household cleaners
such as Fantastic or Formula 409, rinse well and dry
with a clean soft cloth to avoid water marks.
Stainless Steel Surfaces:Stainless Steel Surfaces:
Stainless Steel Surfaces:Stainless Steel Surfaces:
Stainless Steel Surfaces: Wipe and dry stainless
steel in the same direction as the grain. Avoid using
too much pressure, which may mar the surface. To