Filter
Top Products
14
Something Not Working
SYMPTOM
n The hob hotplate does not heat up.
n The plate is not giving satisfactory results
n The oven does not come on
n The oven temperature light does not come on
n It takes too long to finish the dishes, or they
are cooked too fast.
n Steam and condensation settle on the food
and the oven cavity.
SOLUTION
u Check that the unit is plugged in and the
electrical supply is switched on
u Check that the RCCB has not tripped (if fitted)
u Check the mains fuse has not blown
u Check the correct control knob has been
turned.
u Check the plate is clean and dry
u Check the cooking pan is the correct size for the
plate.
u Check the cooking pan has a flat bottom
u Check the setting is correct for the type of
cooking.
u Check a cooking function / temperature have
been selected.
u The socket switch or the switch from the
mains supply to the cooker are ON.
u Check the light bulb, and replace it if
necessary (see "Oven Light Replacement")
u The temperature may need adjusting
u Refer to the contents of this booklet,
especially to the chapter Using the Oven.
u Leave dishes inside the oven no longer than
15-20 minutes after the cooking is completed.
If the appliance is not working correctly, please carry out the following checks, before contacting your
local Electrolux Service Centre.
IMPORTANT:
If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use
or installation, a charge will be made even if the appliance is under guarantee.
If after these checks, the appliance still does not
work, contact your local Service Force Centre.
When you contact the Service Centre, they will
need the following information:
1. Your name, address and post code.
2. Your telephone number
3. Clear and concise details of the fault
4. The model and the serial number (see rating
label)
5. Date of purchase