Electrolux EKG5046 Range User Manual


 
21
WHEN REPLACING HOTPLATE BURNER
PARTS
1. Crown to body. (Do not try to force the crown
on to the body).
Make sure that the hole in the crown is over the
electrode. Check that the location pegs sit in the
slots in the body. When the crown is in this
position let it fall freely on to the body. Check
that the crown can be moved slightly from side
to side.
2. Cap to crown. Place cap centrally on the top of
crown (enamel side up). Move sideways and
front to back to check the cap is properly fitted.
3. Check for ignition. If a burner will not light then
you need to check the crown and cap positions.
CLEANING THE SHELVES AND
GRILL/OVEN FURNITURE
All removable parts, except the grill pan handle can
be washed in the dishwasher.
The grill pan, grill pan grid and oven shelves may be
cleaned using a soap impregnated steel wool pad.
Soaking first in hot soapy water will make cleaning
easier.
CLEANING THE GRILL
Do not clean the grill burner itself. Cleaning the grill
may cause the holes in the burner to become
blocked preventing it from operating correctly. Due
to the nature of stainless steel the grill burner may
tarnish through use over a period of time. This is
quite normal and is not a fault on the appliance
Clean the area around the grill frequently using hot
soapy water.