Filter
Top Products
7
Operating Instructions
ENERGY OPTION SELECTIONS
Hi-Temp
Press Options key to access options available for
the wash cycles.
When HI-TEMP option is selected, the dishwasher
heats water in the main wash to approximately
140°F (60°C). HI-TEMP ON will be displayed.
This increase in water temperature helps
dishwasher detergent remove food, grease and soil
from dishes more effectively and aids in drying.
HI-TEMP option can be used with AUTO, HEAVY
and NORMAL Cycles only.
When HI-TEMP option is selected, the icon will light
up and remain on until the door is closed.
To turn off the HI-TEMP option, press the touchpad
SET a second time. HI-TEMP OFF displayed.
Sanitize
To sanitize your dishes and glassware, select the
SANITIZE option. SANITIZE ON will be displayed
when selected, the light surrounding the icon will
turn red until the START pad is pressed or the door
is closed. This option heats the water temperature
in the final rinse to 157°F (69.4°C) and maintains
that temperature for 7 minutes. SANITIZE is
available in Auto, Heavy, and Normal cycles. Only
these sanitization cycles have been designed to
meet NSF requirements.
The cycle time will be extended until the proper
water temperature is reached. Washing action will
continue during the water heating delay. For best
results, the incoming water temperature should be
at least 120°F (49°C).
If the SANITIZE option was selected, SANITIZED will
be displayed at the end of the cycle. SANITIZED
will not display at the end of the cycle if the NSF
requirements for sanitization are not reached. The
sanitization criteria may not be satisfied if there is
an interruption of the cycle, a power failure occurs,
or if the incoming water temperature is below 120°F
(49°C).
To turn off the SANITIZE option, press SET a second
time. SANITIZE OFF is displayed.
OPERATION SELECTIONS
Delay Time
The Delay Time option allows you to automatically
delay starting your dishwasher from 30 minutes to
24 hours.
Press the DELAY TIME touchpad until the desired
delay time shows in the STATUS window. Display
will indicate the delay start time and will countdown
until cycle starts.
To cancel the DELAY TIME option and begin the
cycle before the delay period is over, press the
START/CANCEL pad.
Delicate
For Lightly soiled fine China. Water usage ranges
from approximately 6.9 to 8.1 gallons. Wash time
ranges from approximately 91 to 106 mins.
Stemware
For lightly soiled China and Crystal. Water usage is
approximately 6.8 gallons. Wash time ranges from
approximately 85 to 92 mins.
Rinse Only
For rinsing dishes that will be washed later. Water
usage is approximately 2.8 gallons. Cycle time is
approximately 20 minutes.
Quick Wash
For lightly soiled and pre-rinsed dishes and
silverware. Water usage is approximately 6.9
gallons. Wash time is approximately 45 mins.
Child Lock Controls
To prevent children from accidently changing the
dishwasher cycle or starting the dishwasher, lock
the dishwasher controls by pressing and releasing
the DELAY TIME icon for 3 seconds. An indicator
light on the lock graphic touchpad will illuminate
when the controls are locked and no new selections
can be made until the lock is released. To unlock
the controls, press the DELAY TIME icon until the
indicator light goes out.