Electrolux EOC 66700 Oven User Manual


 
“The End of Cooking” symbol and
the arrow symbol
flash. On the control
panel, the cleaning cycle (that is the ac-
tual time + cooking time) is displayed.
Touch the ‘ ’ or ‘ ’ controls to select
the required end of cycle time. After a few
seconds, the word Pyro and the symbol
will stop flashing, the acoustic signal
will stop. Tthe Cooking time symbol
will flash until the pyrolytic cleaning cycle
starts.
4. After some time the door lock will be Ac-
tivated and the respective symbol
will
be displayed.
After ending the pyrolytic cleaning process,
the display shows the time of day. The oven
door is still locked.
Once the oven is cooled down, an acoustic
signal sounds and the symbol
disap-
pears. The oven door are unlocked.
To stop the pyrolytic cleaning cycle at any
time; touch the control
.
Oven shelf runner
The shelf support rails on the left and right
hand sides of the oven can be removed for
cleaning the side walls.
First ensure that the oven has cooled down
and has been disconnected from the mains.
Removing the shelf support rails .
First pull the front of the rail away from the
oven wall and then unhitch at the back.
Fitting the shelf support rails
To install, first reattach the rails at the back,
then put them into position at the front and
press them into place.To clean the shelf sup-
port rails, soak in warm soapy water and re-
move stubborn marks with a well wetted
soap impregnated pad. Rinse well and dry
with a soft cloth.
Replaceable telescopic runners
Place the telescopic runner with the locking
system on the chosen level.
Warning! The „stop elements“ at the
extremities of the runner MUST face
upwards.
electrolux 19