Electrolux ERC3711WS Beverage Dispenser User Manual


 
10
Electrolux 818 35 40-00/7
Unpacking
Unpack the appliance and check that it is in good
condition and free of any transport damage. Notify
the dealer immediately of any damage. Hand the
packaging over for recycling.
Do not allow children to play with the
packaging. The plastic film can cause
suffocation.
Removing the transport supports
Remove the tape and the t ransport supports from
· the door sides
· inside the door hinges
· the shelves
Remove the transport hinge.
Mounting the handle
The handle is included in the packaging material of
the cabinet.
Secure the handle.
Cleaning
Wash the inside of the cabinet using lukewarm
water, a mild washing-up detergent and a soft cloth.
Clean off the interior wooden details with a moist
rag and mild kitchen soap. Do not soak the wood.
Installing th e appliance
Make sure that the power plug is not squashed or
damaged by back of the product.
· A damaged power plug may overheat and cause a
fire.
Do not place heavy articles or the product itself on
the power cord.
· there is a risk of a short circuit and fire.
If the power plug socket is loose, do not insert the
power plug.
· there is a risk of electric shock or fire.
To obtain the best performance from the appliance,
ensure :
· the appliance is placed in a dry, cool place and
is not exposed to direct sunlight.
· the appliance is not placed close to a source of
heat, e.g. a cooker or dishwasher.
· the appliance is level. The appliance s hould not
lean
against any wall. If necessary adjust the
feet using t he adjustment spanner supplied.
· there is good air circulation around the appliance
and that the air channels below and behind
the appliance are not blocked. The ventilation
space above the appliance must be at least 4 cm.
The ventilation space can either be
a) directly above the appliance, or
b) behind and above the top cupboard. In this case,
the space behind the cupboard must be at least
50 mm deep.
50mm
a)
b)