Filter
Top Products
21
Connecting the water hose.
The water coupling is connected to a
water tap with an external 3/4 inch
thread.
This work is to be carried out by a
skilled plumbing installation technician.
The refrigerator is to be connected
with a shut-off cock. There are different
type-approved taps and tap
assemblies on the market.
The water hose mu st not be cracked,
squeezed or be in tight bends.
If you require a longer water hose than
that supplied, then a VDE-approved
150 38 85-02/0 supply hose should be
used.
Before the refrigerator is taken into use
in its final location, ensure that the
water connection has been correctly
carried out, that there is no leakage at
the connection to the refrigerator water
valve or to the water tap, and that the
four spacers are properly in position,
see the illustration.
We recommend that the refrigerator is
placed on a "run-off" mat intended for
refrigerators and freezers, which
makes it easier to detect possible
leakage.
Installation of carbon filter
On delivery the carbon filter is placed
in a plastic bag to secure the length of
the carbon filter life. The filter should
be placed behind the grill before the
cabinet is turned on.
The cover can be opened by
simultaneously pressing the lever on
the right of the grill (1) and turning the
cover outward (2). The carbon filter is
then mounted in the slot found in the
back of the cover.
The filter should be handled carefully
so fragments do not loosen from the
surface.
1
2
3