Filter
Top Products
2. Turn the programme knob clockwise
until the programme marker agrees with
the first available washing programme
on the control panel.
3. Release the start/cancel button when
the on/off and the start/cancel indicator
lights start to flash.
4. At the same time, the end-of-pro-
gramme indicator light starts to flash.
The number of flashes shows the cur-
rent adjustment.
Example: 5 flashes / pause / 5 flashes =
level 5.
5. Press the start/cancel button to change
the adjustment. Each time you press the
start/cancel button, the adjustment
goes to the subsequent level.
6. Switch off the appliance to keep the op-
eration.
If the water softener is set electronically
to the level 1, the salt indicator light
stays off.
USE OF DISHWASHER SALT
How to fill the salt container:
1. Turn the cap counterclockwise and
open the salt container.
2. Fill the salt container with 1 litre of water
(only for the first time you fill with salt).
3. Use the funnel to fill the salt container
with salt.
4. Remove the salt around the opening of
the salt container.
5. Turn the cap clockwise to close the salt
container.
It is correct that water comes out from
the salt container when you fill it with
salt.
USE OF DETERGENT AND RINSE AID
8
2
4
5
6
1
7
3
Use of detergent
To help the environment, do not use
more than the correct quantity of deter-
gent.
Follow the detergent manufacturer rec-
ommendations on the detergent pack-
aging.
Do these steps to fill the detergent dispens-
er:
1.
Press the release button
2
to open the
lid
8
of the detergent dispenser.
2.
Put the detergent in the dispenser
3
.
3. If the washing programme has a pre-
wash phase, put a small quantity of de-
tergent in the prewash detergent com-
partment
1
.
electrolux 7