Filter
Top Products
11
Filling with Rinse Aid
Rinse aid ensures that your dishes gleam and are
free from spots, and that you glasses are clear.
1
Use only branded rinse aid for dishwashers.
Never fill the rinse aid container with any
another substance (e.g. concentrated vine-
gar). This would damage the appliance.
Fill with rinse aid:
• Prior to using the dishwasher for the first time.
• When a dark point surrounded by a light ring is to
be seen in the indicator window on the container.
If there is sufficient rinse aid in the container, the
indicator window is uniformly dark.
The rinse aid container is on the inside of the dish-
washer door.
1. Open the door .
2. Turn the lid of the container ¼ of a turn anticlock-
wise and remove.
3. Fill with rinse aid, up to the broken line as a maxi-
mum; this line corresponds to a quantity of
approx. 150 ml .
4. Replace the lid and tighten by turning clockwise.
5. If rinse aid has been spilt, wipe up with a cloth.
Otherwise there will be too much foam during
washing.
Adjusting Rinse Aid Dosing
3
Rinse aid is added to the wash water from
the container when the dishes are rinsed.
The dose can be adjusted from 1-6, corre-
sponding to 1-6 cm
3
rinse aid. The dose is
set to "4" in the factory. Only change the
dose when streaks, milky spots or dried
water drops are to be seen on glasses and
dishes. (see under "What to do, if...").
1. Turn the lid of the container ¼ of a turn anticlock-
wise and remove.
2. Adjust the dose setting with a tea spoon.
3. Replace the lid and tighten by turning clockwise.
4. If rinse aid has run out, wipe up with a cloth.
m
a
x
6
5
4
3
2
1