Filter
Top Products
daily use electrolux 23
Select and start a washing
programme
Select the washing programme and
delay start with the door slightly
opened. The start of the
programme or the countdown of
the delay start will occur only after
the closure of the door. Until then it
is possible to modify the settings.
1. Check that the baskets have been
loaded correctly and that the spray
arms are free to rotate
2. Check that the water tap is opened
3. Press the On/Off button. The
dishwasher must be in setting
mode.
4. Press the button corresponding to
the required programme (see
"Washing programmes" chart). The
light corresponding to the selected
programme will illuminate.
Close the dishwasher’s door, the
programme starts automatically.
4. The opening of the door will
interrupt the countdown. Close the
door; the countdown will continue
from the point at which it was
interrupted.
5. Once the delay start has elapsed
the programme will start
automatically.
Setting and starting the programme
with delay start
1. After having selected the washing
programme, press the delay start
button until the light corresponding
to the chosen hours flashes (3h,
6h, or 9h).
2. Close the dishwasher door, the
countdown starts automatically.
3. The countdown will decrease with
steps of 3 hours.
Interrupt or cancel a washing
programme in progress ONLY if it’s
absolutely necessary.
Attention! Hot steam may escape
when the door is opened. Open the
door carefully.
Interrupt a washing programme in
progress:
● Open the dishwasher door; the
programme will stop. Close the
door; the programme will start from
the point at which it was
interrupted.
Cancelling a delay start in progress
Press the delay start button until
all the indicator lights
corresponding to the hours (3h,
6h, 9h) are off.
Close the dishwasher door, the
washing programme will start
automatically.
117985 59/0en 16-05-2007 14:37 Pagina 23