Filter
Top Products
The furniture door
The door on this appliance is designed for the overlay of
a panel having the following dimensions:
Width: 596 mm
Height: 664 - 714 mm max
Thickness: 20 mm max
Weight: 2 - 7.5 kg max
The panel height should be no more than indicated,
otherwise complete opening of the door will no longer
be possible as the panel hits against the dishwasher
plinth.
Mounting the furniture door
onto the door
The height of the panel depends on the height of
adjacent kitchen units (see kitchen plinth adjustment).
The panel must be fitted with a handle, as the
dishwasher handle will be hidden by the panel. Drill the
panel with a Ø 2 x 12 bit according to the dimensions
indicated in the figure.
Fix the cross bar onto the panel using four 3.5 x 16
screws provided. Reduce the length of fixing screw
according to thickness of panel.
Mount the decor panel by inserting the two pivots of the
cross-bar into the slotted holes of the door. Lift the decor
panel until perfect alignment with the fascia panel is
obtained.
Once the correct position has been found, open the door
and fasten the decor panel on the lower section by
means of the two 4 x 40 screws provided, using the
holes through the inner door.
27
PFI10UK
II19
**
550
30
172
596 max
40
596 max
546
==
30 40
30
II17
II12
II10