Filter
Top Products
12
Activating/deactivating the
acoustic signal
In addition to the optical display (e.g. indicating the
end of the cycle, errors) you can also choose to set
an acoustic signal.
1.Press the ON/OFF button.
3 If the LED indicator of only one programme
button is illuminated, this wash programme
has been activated. The wash programme
must be deselected:
Press function buttons 2 and 3 simultaneously
for approx. 2 seconds.
The LED indicators of all the programme but-
tons that can be selected will illuminate.
2.Press function buttons 2 and 3 simultaneously and
hold them down.
The LED indicators for function buttons 1 to 3 will
flash.
3.Press function button 3.
The LED indicator for function button 3 will flash.
The multi-display will indicate the current setting:
4.Pressing function button 3 will change the setting.
5.Once the multi-display is indicating the required
setting, press the ON/OFF button. The setting is
now saved.
0b Acoustic signal deactivated
1b
Acoustic signal activated (ex-facto-
ry setting)