Filter
Top Products
control panel electrolux 9
The salt indicator light on the
control panel can remain
illuminated for 2-6 hours after the
salt has been replenished,
assuming the dishwasher remains
switched on. If you are using salts
that take longer to dissolve then
this can take longer. The function
of the machine is not affected.
Setting mode
The appliance is in setting mode
when all programme indicator light are
off and end of programme indicator
light is flashing.
Always remember that when:
- setting the water softener,
- activating/deactivating the audible
signals,
the appliance MUST be in setting
mode.
If a programme indicator light is
illuminated and end of programme
indicator light is illuminated with fixed
light, the last performed or selected
programme still set.
In this case, to return to setting mode,
the programme has to be cancelled.
1. Press and hold the programme
selection/cancel button until the
light of the set programme turns
off and the end of programme
indicator light is flashing.
2. Release the programme
selection/cancel button.
Factory setting: audible signals
activated.
It is possible to deactivate the audible
signals, using the programme
selection/cancel button.
Audible signals
Audible signals have been introduced
to help indicate which operations the
dishwasher is performing:
- end of programme
- intervention of an alarm due to
malfunction
Deactivation/activation of the
audible signals
1. Press the On/Off button. The
dishwasher must be in setting
mode.
2. Press and hold the programme
selection/cancel button until
programme light 1 flashes and
programme light 2 illuminates with
a fixed light.
3. Press programme
selection/cancel button again,
programme light 1 illuminates with
a fixed light and programme light 2
starts flashing.
156997950en prov.qxp 1/22/2007 12:31 PM Page 9