Filter
Top Products
Audible signals
Audible signals have been introduced to help indicate which operations the appli-
ance is performing:
• setting the water softener
• end of the programme
• intervention of an alarm due to malfunction.
Factory setting: audible signals activated.
It is possible to deactivate the audible signals, using the function buttons.
1.
Press the On/Off button. The appliance must be in setting mode.
2.
Simultaneously press and hold function buttons B and C, until the light of the
function buttons A, B and C start flashing.
3.
Press function button C, the lights of buttons A and B turn off while the light
of function button C goes on flashing. The digital display indicates the current
setting.
= Audible signals deactivated
= Audible signals activated
4.
To change the setting, press again function button C: the digital display will
indicate the new setting.
5. To memorize the operation, switch off the dishwasher.
First use
Before using your dishwasher for the first time:
• Ensure that the electrical and water connections comply with the installation
instructions
• Remove all packaging from inside the appliance
• Set the water softener
• Pour 1 litre of water inside the salt container and then fill with dishwasher salt
• Fill the rinse aid dispenser
If you want to use combi detergent tablets such as: "3 in 1", "4 in 1", "5 in 1" etc...
set the Multitab function (see "Multitab function").
10
First use