If after all these checks, the problem persists, contact your local Service Force Cen-
tre.
Technical data
Dimension Width - height - depth (cm) 59,6 x 81,8-89,8 x 55,5
Electrical connection - Voltage
- Overall power - Fuse
Information on the electrical connection is given on the rating
plate on the inner edge of the dishwasher's door
Water supply pressure Minimum
Maximum
0,05 Mpa (0,5 bar)
0,8 Mpa (8 bar)
Capacity Place settings 12
Hints for test institutes
Testing in accordance with EN 60704 must be carried out with appliance fully
loaded and using the test programme (see "Washing programmes").
Test in accordance with EN 50242 must be carried out when the salt container
and rinse aid dispenser have been filled with salt and rinse aid respectively and
using the test programme (see "Washing programmes").
Full load: 12 standard place settings
Amount of detergent required: 5 g + 25 g (Type B)
Rinse aid setting: position 4 (Type III)
Example loading arrangements:
Upper basket
1)
32
Technical data