Filter
Top Products
818 16 35-00/7 21
Applies only to the temperature display for the refri-
gerator
• When the FAST CHILL function is switched on (see also section: "Fast
Chill/Fast Freeze"), "IC" is displayed in the temperature display. As
long as the FAST CHILL function is switched on, no refrigerator tem-
perature is indicated in the temperature display.
Applies only to the temperature display for the free-
zer compartment
• If, for example, frozen goods have been partially or completely tha-
wed due to a power failure, the temperature display alternately indi-
cates:
– the freezer compartment temperature (ACTUAL temperature) and
– the highest temperature to which the frozen goods have warmed.
Prior to Initial Start-Up
1
Before connecting the appliance to the mains and putting it into ope-
ration for the first time, leave the appliance to stand for 30 minutes if
was transported upright. After transport on its side, the appliance must
be left to stand for 4 hours before putting it into operation. This is
necessary to allow the oil to flow back into the compressor. Otherwise
the compressor may be damaged.
0 Please clean the appliance interior and all accessories prior to initial
start-up (see section: "Maintenance and Cleaning").
0 Remove the cold accumulation block from the freezer tray.
0 Place the cold accumulation block into a compartment or drawer only
after the optimal storage temperature of -18°C has been reached, and
allow to freeze.
0 After 24 hours place the cold accumulation block at the front of the
freezer tray.
0 Re-freeze the thawed cold accumulation block in the same fashion, e.g.
after cleaning the appliance.