Filter
Top Products
Something not Working
40 818 16 35-00/7
If after the above checks there is still a fault, call your local AEG Service
Force Centre.
In-guarantee customers should ensure that the above checks have been
made as the engineer will make a charge if the fault is not a mechani-
cal or electrical breakdown.
Please note that proof of purchase is required for in-guarantee service
calls.
Excessive build up of frost.
If the door seal is not airtight (probably
after reversing the door)
apply warm air to the non sealing area
using a hair dryer set to a gentle heat. (do
not use a fan heater for this purpose).
This will make the rubber more supple
and allow it to revert to its original shape.
Noise Refer to Normal Operating Sounds
The compressor does not start immedia-
tely after changing the temperature set-
ting.
This is normal, the compressor starts after
a period of time.
Sympton Solution