Filter
Top Products
15
To Refit the Hood with Decor Panel
Attached
1. Insert the upper visor guides into the upper
track in the front of the casing.
2. Pull down the bottom edge of the visor and
insert the lower guides into the track in the
bottom of the casing.
3. Push the visor in until an audible click is heard.
4. The visor can now be opened and closed in its
normal function.
Adjustment
If a heavy door is fitted or if the visor will not stay
closed it may be necessary to make an adjustment to
the closing mechanism of the visor.
Insert a small flat bladed screw driver through the hole
(the friction assembly) on either side of the casing
indicated by the letter “V” and turn clockwise to apply
pressure on the guide.
Both friction assemblies should be adjusted by the
same amount to ensure the visor opens smoothly.
Care should be taken when removing the visor
with the decor panel for cleaning or servicing,
as the visor is now extremely heavy and should
it be dropped, it could damage the appliance
beneath and adjoining work surfaces.