Filter
Top Products
33
What to do if ...
Correcting Malfunctions
Perhaps a malfunction has been caused by a minor error, which you
can correct yourself with the help of the following instructions. Do not
attempt any further repairs if the following instructions do not help in
each specific case.
1
Warning! Refrigerators/freezers may only be repaired by trained
personnel. Repairs carried out by untrained personnel can lead to
substantial danger for the user. Please contact your dealer or our
customer service department for repairs.
Malfunction Possible cause Remedy
Appliance does not
function, green stand-by
display and temperature
display are not lit.
Appliance is not switched
on.
Switch appliance on.
Mains plug is not inserted
or is loose.
Insert mains plug.
Fuse has blown or is defec-
tive.
Check fuse, replace if
necessary.
Mains socket is defective.
Mains malfunctions are to
be corrected by an electri-
cian.
Appliance does not
function, green stand-by
display is not lit, tempera-
ture is indicated as blinking
display, audible warning
sounds at regular inter-
vals.
1
Mains interruption
warning.
1
Please check to see if the
mains plug is inserted or if
the fuse has blown (see
also section: "Control and
Information Systems").
Red warning display
blinks, two temperatures
are indicated alternately by
the temperature display.
Partial/Complete Thaw
Warning.
Frozen goods have been
warmed to such an extent
that they have been parti-
ally or completely thawed.
Please refer to the section
"Control and Information
Systems".