Filter
Top Products
31/35
• Connect the power cable as shown in
the figure. This machine is designed for
a single phase voltage of 230V. The
power supply requires only outlets of
13A fuse and a double pole isolation
switch with at least 3 mm between
contacts.
INSTALLING THE MACHINE
• Lay the U base plate of the machine
on the shelf of the cabinet.
• Ιnsert the L plates,
compensating for any space. The
width of the housing unit the coffee
machine depends on the thickness of
the cabinet’s sides. six side plates
(four being 2 mm thick and two 1 mm
thick) are provided to compensate for
the different possible measures.