Filter
Top Products
30
Electrical Requirements
Before switching on, make sure the electricity supply voltage is the same as
that indicated on the appliance rating plate.
The appliance is supplied with a 13 amp plug fitted. In the event of having to
change the fuse in the plug supplied, a 13
amp ASTA approved (BS 1362) fuse must be
used. Should the plug need to be replaced
for any reason. The wires in the mains lead
are coloured in accordance with the follow-
ing code:
Green and Yellow: Earth
Blue: Neutral
Brown: Live
The wire coloured green and yellow must be
connected to the terminal marked with the
letter “E“ or by the earth symbol or
coloured green and yellow.
The wire coloured blue must be connected
to the terminal “N“ or coloured black.
The wire coloured brown must be connect-
ed to the terminal marked “L“ or coloured red.
Upon completion there must be no cut, or stray strands of wire present
and the cord clamp must be secure over the outer sheath.
Important!
The plug must still be accessible after the appliance has been installed.
The appliance should not be connected to the electrical supply by means
of an extension cable.
In case that the electrical cable has to be replaced, please contact your
local Service Force Centre.
Warning!
A cut off plug inserted into a 13 amp socket is a serious safety (shock)
hazard. Ensure that it is disposed of safely.