Filter
Top Products
818 22 49-00/6 17
Temperature Display
The temperature display can indicate several pieces of
information.
• During normal operation, the temperature currently present in the
refrigerator (ACTUAL temperature) is displayed.
• When the temperature is being adjusted a flashing display indicates
the fridge compartment temperature currently set (DESIRED temper-
ature).
FAST CHILL button
The FAST CHILL function is suited for quick cooling of
large quantities of goods in the refrigerator, e.g. drinks
and salads for a party.
0 1. The FAST CHILL function is switched on by pressing the FAST CHILL but-
ton. The yellow light illuminates.
The FAST CHILL function now provides for intensive cooling. A DESIRED
temperature of +2 °C is automatically selected. The FAST CHILL
function is ended automatically after a period of 6 hours. The originally
selected DESIRED temperature is again valid. The temperature display
shows the ACTUAL refrigerator temperature.
2. The FAST CHILL function can be ended manually at any time by pressing
the FAST CHILL button again. The yellow light goes out.
Prior to Initial Start–Up
1
Before connecting the appliance to the mains and putting it into
operation for the first time, leave the appliance to stand for 30 minutes
if was transported upright. After transport on its side, the appliance
must be left to stand for 2 hours before putting it into operation. This is
necessary to allow the refrigerant to flow back into the compressor.
Otherwise the compressor may be damaged.
0 1. Please clean the appliance interior and all accessories prior to initial
start-up (see section: “Maintenance and Cleaning”).