Filter
Top Products
818 22 49-00/6 9
Fitting the Door Handles
1
Caution! Do not use excessive force and overtighten the screws (max. 2
Nm) as you may damage the door handles.
0 1. Screw the top handle bracket to the
handle rod (1). Fit the bottom han-
dle bracket on the lower left-hand
side of the door (2).
2. Fit the top handle bracket on the
top left-hand side of the door (3)
and screw the handle rod to the
bottom handle bracket (4).
Installation
Installation Location
The appliance should be installed in a well ventilated, dry room.
Energy use is affected by the ambient temperature.
The appliance should therefore
– not be exposed to direct sunlight;
– not be installed next to radiators, cookers or other sources of heat;
– only be installed at a location whose ambient temperature
corresponds to the climate classification, for which the appliance is
designed.
The climate classification can be found on the rating plate, which is
located at the left on the inside of the appliance.