Filter
Top Products
23
H
Rehingeing the door
The side at which the door opens can be
changed from the right side (factory adjust-
ment) to the left side, if the installation site
requires.
Warning! When changing the side at
which the door opens, the appliance
may not be connected to the mains.
Remove plug from the mains before
hand.
Proceed as follows:
1. Remove the upper hinge taking care
for the upper door not to fall off and
keep it for future actions;
Remove the upper support and
mount it in the opposite side
2. remove the upper door;
3. unscrew the middle hinge. Unscrew
the plastic plugs located on the
opposite side of the central hinge and
introduce them in the holes occupied
before by the hinge;
4. remove the lower door;
5. pull off the ventilation grille which is
fixed by two screws;
6. Carefully place the appliance on its
back, totally unscrew the adjustable
foot and screw it in the opposite
side.
7 remove the bottom hinge by unscrew-
ing its fixing screws;
8. using a 12 mm spanner, unscrew the
hinge pin and reassemble it on the
opposite side of the hinge;
9. adjust the level of the appliance by
screwing out the adjustable foot, or
feet, at the bottom of the cabinet
using your fingers or a tool;
10.reassemble the lower hinge on
the opposite side, using the
screws previously removed.