Filter
Top Products
6
Remove transport packaging
The appliance and the interior fittings are protected for transport.
• Remove all adhesive tape and packing pieces from the interior of the
appliance.
B
A
Shelf holders
Your appliance is equipped with shelf
retainers that make it possible to
secure the shelves during transporta-
tion.
To remove them proceed as follows:
Raise the shelf from the back, push it
in the direction of the arrow until it
is freed and remove the retainers.
Description of the appliance
A - Dairy compartment
B - Hanging storage box
C - Can storage shelves
D - Bottle storage shelf
E - Light lamp
F - Glass shelves
G - Glass shelf
H - Salad drawers
I - Control panel
J - Compartment for
freezing fresh food
L - Compartments for
storing frozen food
A
B
C
D
E
F
H
G
I
J
L
23
A
D023
Push appliance into the housing
until stop strip (A) touches the
kitchen unit.
D
C
D723
Open the door and push the appliance
against the side of the kitchen unit op-
posite to that of appliance hinges.
Fasten the appliance with 4 screws
provided in the kit included with the
appliance. Snap the ventilation grille
(C) and hinge cover (D) into position.
Instructions for building-in
D765
Apply the joint sealing strip as shown
in figure.