Filter
Top Products
The electronic timer
Please note that this is a 24 hour clock, for example 2.00 pm is shown
as 1400.
In the following pages we explain
how to set the controls. Read
through them a few times until you
are familiar with the procedure.
If the oven is switched off on the wall, or there is a loss of power, the
clock will stop and you will not be able to use the main oven. When you
first switch the electricity supply on, the timer display will flash.
To set the time of day
Turn the selector knob to 'Manual'
then turn to 'Clock'.
Set the correct time by turning
and holding the setting knob
clockwise. Adjust the time by turning
the setting knob in either direction.
Turn the selector knob back to 'Manual'.
To use the Timer
Turn the selector knob to 'Timer'.
Turn the setting knob clockwise until
the display shows the time you
want. The bell symbol ( ) will be
showing and this will stay lit up
during the time. Our diagram shows
the timer set to 5 minutes.
If you change your mind and want to cancel the time you have set,
simply turn the setting knob anticlockwise. Then turn the selector to
'Manual'.
When you are using the timer you can make the clock show the time of
day by turning the selector knob to 'Manual'. The bell symbol will stay on
to remind you that the timer is set. At the end of the timed period an
alarm will sound and the bell symbol will go out.
S G 4 5 4
22
The electronic timer
Setting knob
Selector
Cookpot symbol
Bell symbol