Filter
Top Products
Operating instructions
27
Starting a washing programme
1. Check that the baskets have been loaded
correctly and that the spray arms can rotate
freely
2. Turn on the water tap
3. Close the dishwasher door
4. Press the On/Off button
The indicator lights of the programme selection buttons illuminate.
5. Setting and starting the programme
To select a programme, press the button of the programme you
wish to select (see “Washing programmes” chart).
The corresponding indicator light remains illuminated while the
other programme buttons indicator lights turn off.
In the digital display will appear, flashing, the running time
(in minutes) of the programme that has been set .
The phase indicator lights foreseen for that programme will
illuminate.
After about 3 seconds from the last pressure of a button the
programme starts automatically.
In the digital display the running time of the programme is no
longer flashing and the indicator lights of the phases will turn off
except for the phase underway.
Setting and starting the programme with the delay start
The setting of the delay start occurs before selecting the
programme
Press the delay start button until the flashing number of the hours
for the delay start will appear in the digital display (from 1h to
19h).
Select a washing programme (see “Washing programmes” chart).
In the digital display will appear, for a moment, the running time
of the programme and then again appears the selected delay start
time.
As soon as the number of hours is displayed without flashing, the
countdown for the delay start is active.
The countdown will decrease with steps of 1 hour.
117994 04/0en 14-06-2006 10:22 Pagina 27