Filter
Top Products
Operating instructions
28
The opening of the door during the countdown will not modify the
delay start.
Once the delay start has elapsed the programme will start
automatically.
Note: it is possible to select a washing programme and the delay
start also with the door slightly opened.
In this case the start of the programme or of the countdown will
occur after the closure of the door.
Until that moment it is possible to modify the set made.
6. To interrupt or cancel a washing programme
in progress
Interrupt or cancel a washing programme in progress
ONLY if it’s absolutely necessary
Attention! Hot steam may escape when the door is opened.
Open the door carefully.
Interrupt a washing programme in progress
a) Open the dishwasher door; the programme will stop.
Close the door; the programme will start from the point at
which it was interrupted.
b) Press the On/Off button, in this case all the indicator lights
turn off. Press the On/Off button again; the programme will
start from the point at which it was interrupted.
Cancel a washing programme in progress
To cancel a washing programme you have to reset the dishwasher;
press simultaneously function buttons 2 and 3 for about 2 seconds,
the indicator light of the button corresponding to the running
programme starts flashing. After about 2 seconds the indicator
lights of all the programme selection buttons will illuminate, this
means that the running programme has been cancelled and that
the machine has returned to setting mode.
If a new washing programme is to be selected, check that there is
detergent in the detergent dispenser.
117994 04/0en 14-06-2006 10:22 Pagina 28