Filter
Top Products
30 cm.
10 cm.
15 cm.
1.
Install the unit on a strong and level surface.
Leveling can be obtained by using the adjusting
screws on the bottom of the unit. For proper
performance the front of the refrigerator “Cabinet”
should be slightly higher than the back.
2.
Allow at least 30 cm. space above the unit, 15 and
10 cm. at the back and sides to allow air ventilation.
3.
Place the unit away form direct sunlight or heat
from stoves.
5.
Provide the unit with its own electrical outlet
(230V, 60 Hz, single phase AC). Never plug your
refrigerator simultaneously with other appliances.
Never use multipurpose adapter.
6.
Attach the ground wire (Green/yellow color wire
located at the lower left portion at the back of the
refrigerator) to any metal pipe or to a cover
screw of the wall receptacle or to a rod buried at
least 2.4 meters. in the ground.
4.
Place the unit away from sinks and water faucets.
INSTALLATION
3