Filter
Top Products
ELECTRIC KNIFE INSTRUCTIONS: .
Blade Release Button
Plastic Guard
On/Off Button
OOPERATION..
BEFORE FIRST USE: Wash blades in hot, soapy water. Rinse, then dry thoroughly. Handle
carefully. Blades are sharp.
HOW TO ASSEMBLE AND USE
1. CAUTION: Be sure cord is not connected to electric outlet when removing or inserting
blades and when knife is not in use. The blades are extremely sharp. Always handle by the
side opposite the cutting edge, or by the plastic guards.
2. If blades are separated, pick up by the plastic guard. Slide the rivet on one blade into the
keyhole slot in the other blade until they are locked together.
3. Holding blades together at the base of the blade with cutting edge down, slide into motor
housing until both blades click into place.
4. Plug cord into 120 volt AC outlet.
5. Hold knife by handle. Pull ON/OFF button back and up like a trigger to operate. You must
hold the button on for the knife to operate.
6. To stop, release button.
HOW TO DISASSEMBLE AND CLEAN
WARNING: To reduce risk of personal injury, always disconnect cord from electric outlet before
inserting or removing blades. Blades are sharp; handle carefully.
1. Unplug cord from electric outlet.
2. Firmly press blade release button. Grasp blades from top dull edge near plastic guard and
carefully pull until blades release.
3. Carefully separate blades by sliding apart to disengage rivet from keyhole.
4. Wash blades in hot, soapy water. Rinse and dry thoroughly.
5. After washing and drying, immediately place blades into the plastic sheath for storage.
6. To clean motor housing and cord, wipe with a damp cloth and then dry thoroughly.
HINTS FOR BEST RESULTS
1. Move knife through the food. Do not use a back and forth sawing motion.
2. Let meat stand about 15 minutes after cooking and before slicing.
3. Slice down to and around bone. Do not attempt to slice through bone.
4. Do not cut through frozen foods.
5. Do not attempt to sharpen the serrated blades at home.