Filter
Top Products
10
OPERATION
Make sure the Espresso Handle
aligns with the arrow (next to the
word, INSERT) on the maker, then
release the Thumb Bar and insert
the Espresso Handle into the unit.
Lock it in place by turning it counter-
clockwise until it is in the ‘lock’
position.
3
Place a cup on the Espresso Shelf
and with the Steam control set to
OFF, press the Espresso ON/OFF
button to the in ( ) position;
the orange Power indicator will light.
4
PREHEATING THE UNIT T O MAKE ESPRESSO
Follow the instructions below to preheat.
Open the tank cover and fill with cold
water as desired.
1
Pull the Thumb Bar so it is against
the handle. Insert Espresso Filter
into the Espresso Handle and push
the Thumb Bar to hold the Espresso
Filter in place.
2
1
2
5
Press the Espresso/Cappuccino
button 1 to the Espresso ( )
position. Press the Pump button 2 to
the PUMP ( ) position.
Let the water come out for approx.
five seconds and then press the
PUMP button 2 again to the STOP
( ) position. Remove the
cup.
The unit is now ready to make
espresso.
ON
STOP
PUMP/