Filter
Top Products
Product Overview:
1. Light Switch* 2. Temperature Adjustment Buttons* 3. LED Display* 4. Handle
5. Light Cover 6. Interior Lights 7. Chrome Shelve
8. Feet 9. Magnetic Seal 10. Door
* See Control Panel Overview section below for more detailed information
Control Panel Overview:
▲ - Increase temperature in increments of 1°F (Fahrenheit)
▼ - Decrease temperature in increments of 1°F (Fahrenheit)
- Turn interior lamp on/off.
Unpacking the unit:
1. Remove the exterior and interior packing.
2. Check to be sure you have all the following parts:
a. One (1) wine cooler
b. One (1) owner’s manual
c. Two (2) chrome bottle racks
d. One (1) fan filter
Finding a good spot for your wine cooler:
• Place your wine cooler on a flat surface that is strong enough to support it when fully
loaded.
• Allow 5 inch (15cm) of space on the rear and both sides of the wine cooler to allow
proper ventilation.
• This wine cooler is designed to be free standing only, and should not be recessed or
built-in (fully recessed).
• Do not place heavy objects on top of the unit.
• Do not locate the unit in a moist place.
• Do not locate the wine cooler in direct sunlight.
• The unit’s cooling system operates efficiently with an ambient temperature of 77°F (25°C)
or less.*
* Because of technological limitation , the interior temperature can be set between 44°F (7°C) and 66°F (19°C) on the
control panel only at the room temperature of 77°F (25°C)
-2-