Emerson UWL Water Dispenser User Manual


 
Deck Plate
Mounting Gasket
Property Damage: Do not pinch or break copper
tubing. Do not distort the last 1 inch of tubing.
2
Unpack faucet components.
On a firm, flat surface, carefully
straighten the copper tubing.
A
C
D
INSTALLING THE FAUCET
5
Slide plastic mounting gasket over
all tubes descending from faucet
body and seat mounting gasket into
bottom of faucet until flush.
Position supplied deck plate over
the hole into which the faucet will
be installed.
With mounting gasket in place, feed
tubes down into hole until faucet
rests on deck plate (see illustration).
B
From under the sink, place the
metal mounting plate onto the
threaded stud.
Make sure faucet head is at the
desired angle.
Place the supplied lock washer and
hex nut on to the threaded stud.
Tighten to secure the faucet to the
sink top. Do not overtighen.